Model

Parameter

Tinyhawk Lite Drone

Wheelbase: 75mm

Dimensions: 104 x 104 x 52mm

Weight: ~37g (without battery)

Motor: 0816 coreless DC 3.7V

Propellers: HQ 40mm 3-blade

Main Controller: STM32F411 (100MHz), 1S input, integrated ELRS (2.4G)receiver (SPI)

Camera: RunCam Nano 3

VTX: 32-bit, 40CH, open-source

VTX Power: 0/25mW/100mW/400mW

Battery: 1S HV 750mAh

EMAX E8 Remote Transmitter

(ELRS-2.4G)

Weight: 260g (without battery)

Dimensions: L x W x H = 150 x 140 x 45 mm

Channels: 8 (configurable)

2.4G System: SX1280 transmitter module

Frequency Range: 2.4 GHz (2400 MHz - 2483.5 MHz)

Transmission Rate: 50Hz / 150Hz / 250Hz / 500Hz

Return Rate: OFF / 1:128 / 1:64 / 1:32 / 1:16 / 1:8 / 1:4 / 1:2

Power Output: 10 mW / 25 mW / 50 mW / 100 mW

Operating Voltage / Current: 3.7 - 4.2 V / 170 mA

Battery: 18650 lithium-ion battery, Charging System: Type-C port, built-in 1A linear lithium-ion battery charging system

External Interfaces: Type-C port, 3.5 mm audio jack (wired trainer port)

Other Features: Supports simulators, stick calibration, left/right hand switching, firmware updates (via USB), adjustable power output, adjustable transmission/return rates, and binding key changes.

EMAX Transporter II FPV Goggle

Maximum Dimensions (excluding antenna, folded): L x W x H = 155 x100 x 90 mm

Weight (including head strap and antenna, excluding battery): approx. 398 g

Screen Resolution: 480 x 272

Display Size: 4.3 inches

Battery: Built-in 1300mAh lithium-ion battery

Operating Voltage: 3.7 V - 4.2 V

Operating Frequency: 5.8 GHz band (5658 MHz - 5945 MHz)

Charging System: Built-in USB 1A linear lithium-ion battery charging system

Auto Power Off Timer: Off / 3 minutes / 5 minutes / 10 minutes(selectable)

32-bit Analog Video Transmission

Frequency: 5.8 GHz, 40 channels

RF Power: 0 / 25 mW / 100 mW / 400 mW (selectable)

Power Input: 5V

Other features: Supports SmartAudio protocol, supports VTX firmware updates via flight controller.

Tinyhawk Lite ESC

The Tinyhawk Lite ESC is a built-in 4-in-1 brushed ESC

Input voltage: DC 3.7-4.2V

Output current: 10A

Supported signal protocol: BRUSHED

Tinyhawk Lite Flight Controller

MCU: STM32F411CEU6 (100 MHz)

MPU: ICM42688 (SPI connection)

Supports OSD: AT7456E

Power input: 1S battery

Supports programmable RGB LED

Two UART ports (UART1 and UART2)

Onboard BECs: 5V/2.5A and 3.3V/300mA

Firmware: EMAX_TINYHAWKF4SX1280