This little thing absoultely screams. Out of the box it did have some issues, but im an RC hobbiest so I was able to solve the problems. The little wires that go from the ESC to the motors are too short!! They need to add like .5 mm to each wire or even 1mm would be better. The plug at the end of the wires wouldnt stay plugged into the flight controller board where the esc is located....i used a drop of super glue on each plug to keep the plug from popping out....then i got my radio setup and armed to motors, and noticed that one of the motors was barely moving.....i unscrewed the motor and looked at the wires underneath it and sure enough....there are 3 wires that solder to the motor...1 of them was off....i soldered it and got it to work perfectly....then i started doing some test flights in the backyard with it just to see how long my batteries are going to fly it for...and wouldnt you know it...another wire on a different motor came off at the solder....i soldered it back on and now we seem to be good to go...i took it out for a proper flight and wow does this thing ever move....i dont see the need to buy another racing drone after buying this one...even though mine had some issues right out of the box, dont let that deter you from buying this one...just give it a good inspection 1st....if you know how to solder...great...thats gonna help....once you get it in the air you're gonna love it...its like flying a jet.....i almost put this thing up in the clouds!!.....i could see the clouds coming closer and closer very fast and i was like whoa whoa...this is too high for me....bring her down....haha ....im actually thinking about buying a 2nd one, i really like this little drone

This little thing absoultely screams. Out of the box it did have some issues, but im an RC hobbiest so I was able to solve the problems. The little wires that go from the ESC to the motors are too short!! They need to add like .5 mm to each wire or even 1mm would be better. The plug at the end of the wires wouldnt stay plugged into the flight controller board where the esc is located....i used a drop of super glue on each plug to keep the plug from popping out....then i got my radio setup and armed to motors, and noticed that one of the motors was barely moving.....i unscrewed the motor and looked at the wires underneath it and sure enough....there are 3 wires that solder to the motor...1 of them was off....i soldered it and got it to work perfectly....then i started doing some test flights in the backyard with it just to see how long my batteries are going to fly it for...and wouldnt you know it...another wire on a different motor came off at the solder....i soldered it back on and now we seem to be good to go...i took it out for a proper flight and wow does this thing ever move....i dont see the need to buy another racing drone after buying this one...even though mine had some issues right out of the box, dont let that deter you from buying this one...just give it a good inspection 1st....if you know how to solder...great...thats gonna help....once you get it in the air you're gonna love it...its like flying a jet.....i almost put this thing up in the clouds!!.....i could see the clouds coming closer and closer very fast and i was like whoa whoa...this is too high for me....bring her down....haha ....im actually thinking about buying a 2nd one, i really like this little drone

This little thing absoultely screams. Out of the box it did have some issues, but im an RC hobbiest so I was able to solve the problems. The little wires that go from the ESC to the motors are too short!! They need to add like .5 mm to each wire or even 1mm would be better. The plug at the end of the wires wouldnt stay plugged into the flight controller board where the esc is located....i used a drop of super glue on each plug to keep the plug from popping out....then i got my radio setup and armed to motors, and noticed that one of the motors was barely moving.....i unscrewed the motor and looked at the wires underneath it and sure enough....there are 3 wires that solder to the motor...1 of them was off....i soldered it and got it to work perfectly....then i started doing some test flights in the backyard with it just to see how long my batteries are going to fly it for...and wouldnt you know it...another wire on a different motor came off at the solder....i soldered it back on and now we seem to be good to go...i took it out for a proper flight and wow does this thing ever move....i dont see the need to buy another racing drone after buying this one...even though mine had some issues right out of the box, dont let that deter you from buying this one...just give it a good inspection 1st....if you know how to solder...great...thats gonna help....once you get it in the air you're gonna love it...its like flying a jet.....i almost put this thing up in the clouds!!.....i could see the clouds coming closer and closer very fast and i was like whoa whoa...this is too high for me....bring her down....haha ....im actually thinking about buying a 2nd one, i really like this little drone

showed up in two weeks. Everything is great, comes as advertised. Always shopping banggood. I like that my package is also secured in a Canada post box on arrival.

showed up in two weeks. Everything is great, comes as advertised. Always shopping banggood. I like that my package is also secured in a Canada post box on arrival.

showed up in two weeks. Everything is great, comes as advertised. Always shopping banggood. I like that my package is also secured in a Canada post box on arrival.

• 
• 
• 
• 

• 
• 
• 
• 

Rotate left Rotate right