EdenFantasys Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Tools, Industrial & Scientific
0أعجبني

جهاز اختبار منحنى VI ثنائي القناة، يعرض شكلين موجيين في نفس الوقت للمقارنة بسهولة

4.0567
د.ك14.20 / د.ك17.33
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

د.ك11.11 / د.ك17.33
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

دفع آمن مضمون

هدية مجانية
هدية مجانية مع كل عملية شراء
سياسة الشحن
شحن قياسي مجاني للطلبات فوق 9.9 دولار
سياسة الإرجاع
سيتم قبول العناصر المرتجعة في غضون 40 يومًا من تاريخ استلام البضائع. لا يمكن إرجاع أو استبدال العناصر المخصصة. العناصر المشتراة ببطاقة هدية إلكترونية قابلة للاستبدال فقط؛ لا تنطبق عمليات الاسترداد.

هدية مجانية

مرحبًا بكم في Roymall، موقعكم الاحترافي لشراء هدايا المتاجر الكبرى الفاخرة. نحن نقدر ونقدر دعمكم كثيرًا ونريد أن نعبر عن امتناننا بإضافة لمسة إضافية من الإثارة إلى مشترياتكم. عندما تتسوق معنا، لن تستمتع فقط بمنتجات عالية الجودة تعزز نمط حياتك، ولكنك ستتلقى أيضًا هدية مجانية حصرية مع كل طلب تقدمه. هل أنت مستعد لاستكشاف مجموعتنا والعثور على هداياك المثالية؟ تصفح اختيارنا من عناصر المتاجر الكبرى الفاخرة، قدم طلبك، وتطلع إلى وصول هديتك المجانية مع مشترياتك.

سياسة الشحن

سنعمل بجد لتسليم العناصر إليك بعد استلام طلباتك والتأكد من وصولها بأمان. سيتم توفير تفاصيل التسليم في بريد التأكيد الخاص بك.في معظم الحالات، يتم معالجة الطلبات في غضون يومين. في ظروف خاصة، قد يتم تأخيرها على النحو التالي: عند تقديم طلبك يوم السبت أو الأحد أو في أيام العطل الرسمية، سيتم تأخيره لمدة يومين.عادة، يستغرق الأمر من 5 إلى 7 أيام عمل (من الاثنين إلى الجمعة) دون تأثر بتأخر الرحلات الجوية أو العوامل البيئية الأخرى.نظرًا لأن خدمة الشحن لدينا عالمية، فإن أوقات التسليم تعتمد على موقعك، لذلك قد يستغرق الأمر بضعة أيام، ونرجو منك الصبر إذا كنت في مناطق أو دول نائية.

1. سياسة الإرجاع والاستبدال

نحن نقبل فقط العناصر المشتراة من roymall.com. إذا اشتريت من موزعينا المحليين أو تجار التجزئة الآخرين، فلا يمكنك إرجاعها إلينا. العناصر النهائية أو الهدايا المجانية غير قابلة للإرجاع.لكي تكون مؤهلاً للإرجاع، يجب أن يكون العنصر غير مستخدم وفي نفس الحالة التي استلمته بها. يجب أيضًا أن يكون في العبوة الأصلية.بعد استلام تعليمات الإرجاع منا، يرجى تغليف العناصر المرتجعة وإيداع الطرد في مكتب البريد المحلي أو خدمة توصيل أخرى.
سنقوم بمعالجة إرجاعك أو استبدال العنصر في غضون 3-5 أيام عمل بعد استلامه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك.لا يمكن قبول الإرجاع أو الاستبدال إذا تم إنتاج المنتج حسب الطلب، بما في ذلك الحجم المخصص أو اللون المخصص أو الطباعة المخصصة.إذا كنت بحاجة إلى مزيد من المساعدة، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +8619359849471

2. سياسة الاسترداد

ستحصل على استرداد كامل أو رصيد متجر بنسبة 100% بعد استلامنا للطرد المرتجع والتحقق منه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك. يرجى ملاحظة أن تكاليف الشحن وأي رسوم أو ضرائب غير قابلة للاسترداد. تكاليف الشحن الإضافية غير قابلة للاسترداد بمجرد شحن الطرد. أنت مسؤول عن دفع هذه الرسوم، ولا يمكننا إعفاؤها أو استردادها، حتى إذا تم إرجاع الطلب إلينا.بمجرد استلامنا وتأكيد العنصر المرتجع، سنرسل لك بريدًا إلكترونيًا لإعلامك بأننا قد تلقينا العنصر المرتجع. سنخطرك أيضًا بموافقة أو رفض طلب الاسترداد الخاص بك.إذا كانت لديك أي مشاكل تتعلق بعملية الاسترداد، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +8619359849471

Two-way VI curve tester, which can display two-way waveforms at the same time, which is convenient for comparison.
4 levels of internal resistance adjustable, 4 test frequencies, can be used when connected to an oscilloscope, both analog oscilloscopes and digital oscilloscopes can be used

Oscilloscope parameter setting:

*. Adjust the oscilloscope to X-Y mode(different oscilloscopes have different adjustment methods, please explore by yourself)
* Adjust the vertical parameters of the 2 channels of X Y to 1V/div, and only one of the single-track oscilloscopes needs to be adjusted. ,
*The analog oscilloscope does not need to adjust the time base, the digital oscilloscope time base is adjusted between 1-5ms
*After the connection is correct, the oscilloscope will display a horizontal line. If a vertical line is displayed, the xY plug will be reversed.
*Adjust the vertical and horizontal parameters, the horizontal and vertical lines are in the display box.

Method of connecting analog oscilloscope:

The analog oscilloscope connection is relatively simple, and different oscilloscopes are slightly different.

Adjust the oscilloscope to xY mode. Some oscilloscopes can be selected by pressing the buttons, while others are selected by the knob to xY mode. Please study by yourself.

Connect the BNC cable to the oscilloscope and power on. Normally, a horizontal line will be displayed. Adjust the xY vertical channel parameters, about 1V/div, and then adjust the x Y attenuation so that the horizontal line is in the display frame. It can also pass the VI test version. The x attenuation potentiometer on the upper side can assist in adjusting the length of the horizontal line. If the test pen iis short-circuited, a vertical line will be displayed under normal circumstances. If the vertical line is too long or too short, you need to adjust the Y channel parameters to make the vertical line in the display frame. Half grid or 1 grid to the edge is better. If the horizontal and vertical lines are normal, you can enter the normal measurement.

How to connect a digital oscilloscope:

For digital oscilloscopes, enter the xY mode through the menu or keys. The two channels of xY are adjusted to 1V/div,and the single-track oscilloscope only needs to adjust the Y channel. Adjust the time base to 1-5 milliseconds. The xY channel selects DC coupling, and the
attenuation is 1x.

When the oscilloscope is not connected, the screen should be a bright spot. Adjust the horizontal and vertical to center the bright spot. Connect the VI tester. Normally, it should be a horizontal line. Adjust the 103 potentiometer at the top of the VI board to make the horizontal line in the display frame. , Half a grid or 1 grid to the edge is
better. Short-circuit the test leads, and the display should be a vertical line at this time. Adjust the Y channel parameters so that the vertical line is in the display frame. So far, debugging is basically over.

When testing the circuit board online, do not charge the circuit board. If there is a large capacitor on the circuit board, discharge the capacitor first, otherwise it is easy to burn out the VI test board.
اشتري مع Paypal
Tools, Industrial & Scientific Ranking

جهاز اختبار منحنى VI ثنائي القناة، يعرض شكلين موجيين في نفس الوقت للمقارنة بسهولة

جهاز اختبار منحنى VI ثنائي القناة، يعرض شكلين موجيين في نفس الوقت للمقارنة بسهولة

جهاز اختبار منحنى VI ثنائي القناة، يعرض شكلين موجيين في نفس الوقت للمقارنة بسهولة

جهاز اختبار منحنى VI ثنائي القناة، يعرض شكلين موجيين في نفس الوقت للمقارنة بسهولة

Customer Reviews

4.70 out of 5
See all 29 reviews
Write a Review
  • All Reviews (29)
  • Image ( 2 )
  • Video (0)
  • All Star
    • All Star(29)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 21/08/2022

    Funciona perfectamente y llegó el envío en perfectas condiciones. Es el complemento ideal de todos los que tenemos un osciloscopio, para comprobar los componentes de una placa de circuitos y sus componentes electrónicos defectuosos.

    Comments (0)
    Show Original
  • 25/08/2022

    I was a bit unhappy at first as I was not able to download the manual and my unit arrived with a cracked case. I began to investigate it and repair it. The instructions available on the sales page provided enough information to set the unit up and running some tests. The unit works better than I had expected. I was able to determine the frequencies used. Low = 62 Hz Med = 234 Hz Med 2 = 2 kHz and High = 14.5 kHz. The red knob selects one of 4 different internal resistances. The A/B push button turns on and off the dual channel mode so that you can easily compare one circuit board position to another. The Blue knob adjusts the position of the "B" Channel image on the scope screen. I added a power switch to the unit so that it could be left plugged in when I wanted to. I also added some English Labels and non-slip feet for the back so that it doesn't slide around on the bench. The only item I have not been able to identify is a Blue Jack on the front that is labeled "G" on the front and "T" on the internal board. If anyone has figured what the "G" Jack is please let me know. I wrote a complaint to Banggood about the inability to down load the Manual and about a week later they sent me the pdf file. Unfortunately it did not identify the "G" jack. Over All I am very pleased with the unit and the way it functions. I would recommend it to anyone who has a curiosity about curve tracers and a scope capable of X-Y operation.

    Comments (2)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-19 of 19 |
    Show Original

    A part of the QA has been auto-translated.

    سلتي السلة (0)
    مفضلتي مفضلتي (0)

    Roymall Service