جيككريت؟ ٨ أمبير تيار مستمر ٥-٣٠ فولت إلى ١.٢٥-٣٠ فولت تيار مستمر ١٥٠ كيلوهرتز، وحدة طاقة قابلة للتعديل، تنظيم جهد تلقائي للرفع والخفض، مع حماية من قصر الدائرة وارتفاع درجة الحرارة.
* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
سيتم قبول العناصر المرتجعة في غضون 40 يومًا من تاريخ استلام البضائع. لا يمكن إرجاع أو استبدال العناصر المخصصة. العناصر المشتراة ببطاقة هدية إلكترونية قابلة للاستبدال فقط؛ لا تنطبق عمليات الاسترداد.
هدية مجانية
مرحبًا بكم في Roymall، موقعكم الاحترافي لشراء هدايا المتاجر الكبرى الفاخرة. نحن نقدر ونقدر دعمكم كثيرًا ونريد أن نعبر عن امتناننا بإضافة لمسة إضافية من الإثارة إلى مشترياتكم. عندما تتسوق معنا، لن تستمتع فقط بمنتجات عالية الجودة تعزز نمط حياتك، ولكنك ستتلقى أيضًا هدية مجانية حصرية مع كل طلب تقدمه. هل أنت مستعد لاستكشاف مجموعتنا والعثور على هداياك المثالية؟ تصفح اختيارنا من عناصر المتاجر الكبرى الفاخرة، قدم طلبك، وتطلع إلى وصول هديتك المجانية مع مشترياتك.
سياسة الشحن
سنعمل بجد لتسليم العناصر إليك بعد استلام طلباتك والتأكد من وصولها بأمان. سيتم توفير تفاصيل التسليم في بريد التأكيد الخاص بك.في معظم الحالات، يتم معالجة الطلبات في غضون يومين. في ظروف خاصة، قد يتم تأخيرها على النحو التالي: عند تقديم طلبك يوم السبت أو الأحد أو في أيام العطل الرسمية، سيتم تأخيره لمدة يومين.عادة، يستغرق الأمر من 5 إلى 7 أيام عمل (من الاثنين إلى الجمعة) دون تأثر بتأخر الرحلات الجوية أو العوامل البيئية الأخرى.نظرًا لأن خدمة الشحن لدينا عالمية، فإن أوقات التسليم تعتمد على موقعك، لذلك قد يستغرق الأمر بضعة أيام، ونرجو منك الصبر إذا كنت في مناطق أو دول نائية.
1. سياسة الإرجاع والاستبدال
نحن نقبل فقط العناصر المشتراة من roymall.com. إذا اشتريت من موزعينا المحليين أو تجار التجزئة الآخرين، فلا يمكنك إرجاعها إلينا.العناصر النهائية أو الهدايا المجانية غير قابلة للإرجاع.لكي تكون مؤهلاً للإرجاع، يجب أن يكون العنصر غير مستخدم وفي نفس الحالة التي استلمته بها. يجب أيضًا أن يكون في العبوة الأصلية.بعد استلام تعليمات الإرجاع منا، يرجى تغليف العناصر المرتجعة وإيداع الطرد في مكتب البريد المحلي أو خدمة توصيل أخرى. سنقوم بمعالجة إرجاعك أو استبدال العنصر في غضون 3-5 أيام عمل بعد استلامه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك.لا يمكن قبول الإرجاع أو الاستبدال إذا تم إنتاج المنتج حسب الطلب، بما في ذلك الحجم المخصص أو اللون المخصص أو الطباعة المخصصة.إذا كنت بحاجة إلى مزيد من المساعدة، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +8619359849471
2. سياسة الاسترداد
ستحصل على استرداد كامل أو رصيد متجر بنسبة 100% بعد استلامنا للطرد المرتجع والتحقق منه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك.يرجى ملاحظة أن تكاليف الشحن وأي رسوم أو ضرائب غير قابلة للاسترداد. تكاليف الشحن الإضافية غير قابلة للاسترداد بمجرد شحن الطرد. أنت مسؤول عن دفع هذه الرسوم، ولا يمكننا إعفاؤها أو استردادها، حتى إذا تم إرجاع الطلب إلينا.بمجرد استلامنا وتأكيد العنصر المرتجع، سنرسل لك بريدًا إلكترونيًا لإعلامك بأننا قد تلقينا العنصر المرتجع. سنخطرك أيضًا بموافقة أو رفض طلب الاسترداد الخاص بك.إذا كانت لديك أي مشاكل تتعلق بعملية الاسترداد، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +8619359849471
Module parameters:
Input voltage: DC5-30V Input current: 8A (MAX) peak 10A (6A work a long time) Quiescent current: 4mA (operating voltage is not the same there will be errors) Output voltage: 1.25-30V continuously adjustable Output Current: 10A (MAX) (5A long natural heat inside) Output current range: 0.2-10A Working temperature: -40 to + 85 degrees Operating frequency: 150KHz Conversion efficiency: Typical 91% (12V turn 12V5A) maximum 93% Overcurrent protection: there Short circuit protection: (limiting protection) Overtemperature protection: (automatically reduce the output voltage after overtemperature) Input reverse polarity protection: None, (if necessary, please enter the string into the diode) Output anti-anti-irrigation: Yes, no need for charging plus blocking diode. Connection: Terminal output, (IN is the input, OUT output)
Output current adjustment method:
1. CV potentiometer adjustment, depending on your load requirements, the output voltage is set to the voltage value you need.
2. CC potentiometer counterclockwise located about 30 laps, (ie, the output current is set to a minimum), connected to the LED, potentiometer CC tune to the desired current. After charging for battery, the battery fully discharged, and then to output, adjust to your desired current CC, (be sure to use for charging batteries completely discharged before being allowed to transfer, because the battery power is left in the more, the charging current is smaller.) Please do not use the short-circuit current way of transfer, the circuit structure of the module can not short-circuit the way transfer
Package included:
1 x Automatic Step Up Step Down Adjustable Power Module
I used this module to build a variable power supply.
I use an input voltage of 12 volts (from a computer power supply) and need this module to create a variable (settable via the potmeter) output voltage ca 1 - 30 volt.
With output voltages over 12 volts everything works fine.
In the step down mode (voltages below 12 volt) the output voltage is not stable. For instance if I set the output voltage to 5 volts and apply no or very little load, then the outputvoltage "swings" between 4.8 and 5.3 volt.
This only stops if I apply a larger load that draws at least 500mA of current.
I used this module to build a variable power supply.
I use an input voltage of 12 volts (from a computer power supply) and need this module to create a variable (settable via the potmeter) output voltage ca 1 - 30 volt.
With output voltages over 12 volts everything works fine.
In the step down mode (voltages below 12 volt) the output voltage is not stable. For instance if I set the output voltage to 5 volts and apply no or very little load, then the outputvoltage "swings" between 4.8 and 5.3 volt.
This only stops if I apply a larger load that draws at least 500mA of current.
I used this module to build a variable power supply.
I use an input voltage of 12 volts (from a computer power supply) and need this module to create a variable (settable via the potmeter) output voltage ca 1 - 30 volt.
With output voltages over 12 volts everything works fine.
In the step down mode (voltages below 12 volt) the output voltage is not stable. For instance if I set the output voltage to 5 volts and apply no or very little load, then the outputvoltage "swings" between 4.8 and 5.3 volt.
This only stops if I apply a larger load that draws at least 500mA of current.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-15 of 15|
Show Original
A part of the QA has been auto-translated.
0
Q:
Is it OK to connect input minus together with output minus?
Is it OK to connect input minus together with output minus?
I bought 4, tested all four, and was disappointed. Unfortunately, it cannot give the values in the descriptions. Above 2.5 amps voltage drops. it gets pretty hot. It is not possible to run a laptop. Not bad for 25 watts of energy needs.
I bought 4, tested all four, and was disappointed. Unfortunately, it cannot give the values in the descriptions. Above 2.5 amps voltage drops. it gets pretty hot. It is not possible to run a laptop. Not bad for 25 watts of energy needs.
Answered by Ahmet Albayrak on 24/03/2022Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.