Roymall Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Subscribe to Roy's Newsletter
English | 日本語 | Deutsch | Español | Русский | Français | بالعربية
Select Currency Dropdown Arrow
اختر اللغة Dropdown Arrow
Home>mall>Electronics
0أعجبني

آلة لحام نقطي لتخزين البطاريات المحمولة DIY، معدات لحام لوحات الدوائر المطبوعة، لحام نقطي لبطاريات 18650 و26650 بجهد 12 فولت

4.71213
$10.76 /$13.13
  • Direct purchase from the factory

    • *Name:

    • *Email:

    • *Phone:

    • *Quantity:

    • *Content:

    • Attachment:

      Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

    $6.76 /$13.13
    -+
    Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days
    location

    دفع آمن مضمون

    هدية مجانية
    هدية مجانية مع كل عملية شراء
    سياسة الشحن
    شحن قياسي مجاني للطلبات فوق 9.9 دولار
    سياسة الإرجاع
    سيتم قبول العناصر المرتجعة في غضون 40 يومًا من تاريخ استلام البضائع. لا يمكن إرجاع أو استبدال العناصر المخصصة. العناصر المشتراة ببطاقة هدية إلكترونية قابلة للاستبدال فقط؛ لا تنطبق عمليات الاسترداد.

    هدية مجانية

    مرحبًا بكم في Roymall، موقعكم الاحترافي لشراء هدايا المتاجر الكبرى الفاخرة. نحن نقدر ونقدر دعمكم كثيرًا ونريد أن نعبر عن امتناننا بإضافة لمسة إضافية من الإثارة إلى مشترياتكم. عندما تتسوق معنا، لن تستمتع فقط بمنتجات عالية الجودة تعزز نمط حياتك، ولكنك ستتلقى أيضًا هدية مجانية حصرية مع كل طلب تقدمه. هل أنت مستعد لاستكشاف مجموعتنا والعثور على هداياك المثالية؟ تصفح اختيارنا من عناصر المتاجر الكبرى الفاخرة، قدم طلبك، وتطلع إلى وصول هديتك المجانية مع مشترياتك.

    سياسة الشحن

    سنعمل بجد لتسليم العناصر إليك بعد استلام طلباتك والتأكد من وصولها بأمان. سيتم توفير تفاصيل التسليم في بريد التأكيد الخاص بك.في معظم الحالات، يتم معالجة الطلبات في غضون يومين. في ظروف خاصة، قد يتم تأخيرها على النحو التالي: عند تقديم طلبك يوم السبت أو الأحد أو في أيام العطل الرسمية، سيتم تأخيره لمدة يومين.عادة، يستغرق الأمر من 5 إلى 7 أيام عمل (من الاثنين إلى الجمعة) دون تأثر بتأخر الرحلات الجوية أو العوامل البيئية الأخرى.نظرًا لأن خدمة الشحن لدينا عالمية، فإن أوقات التسليم تعتمد على موقعك، لذلك قد يستغرق الأمر بضعة أيام، ونرجو منك الصبر إذا كنت في مناطق أو دول نائية.

    1. سياسة الإرجاع والاستبدال

    نحن نقبل فقط العناصر المشتراة من roymall.com. إذا اشتريت من موزعينا المحليين أو تجار التجزئة الآخرين، فلا يمكنك إرجاعها إلينا. العناصر النهائية أو الهدايا المجانية غير قابلة للإرجاع.لكي تكون مؤهلاً للإرجاع، يجب أن يكون العنصر غير مستخدم وفي نفس الحالة التي استلمته بها. يجب أيضًا أن يكون في العبوة الأصلية.بعد استلام تعليمات الإرجاع منا، يرجى تغليف العناصر المرتجعة وإيداع الطرد في مكتب البريد المحلي أو خدمة توصيل أخرى.
    سنقوم بمعالجة إرجاعك أو استبدال العنصر في غضون 3-5 أيام عمل بعد استلامه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك.لا يمكن قبول الإرجاع أو الاستبدال إذا تم إنتاج المنتج حسب الطلب، بما في ذلك الحجم المخصص أو اللون المخصص أو الطباعة المخصصة.إذا كنت بحاجة إلى مزيد من المساعدة، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +447549870296

    2. سياسة الاسترداد

    ستحصل على استرداد كامل أو رصيد متجر بنسبة 100% بعد استلامنا للطرد المرتجع والتحقق منه. سيتم معالجة المبلغ المسترد وإضافته تلقائيًا إلى طريقة الدفع الأصلية الخاصة بك. يرجى ملاحظة أن تكاليف الشحن وأي رسوم أو ضرائب غير قابلة للاسترداد. تكاليف الشحن الإضافية غير قابلة للاسترداد بمجرد شحن الطرد. أنت مسؤول عن دفع هذه الرسوم، ولا يمكننا إعفاؤها أو استردادها، حتى إذا تم إرجاع الطلب إلينا.بمجرد استلامنا وتأكيد العنصر المرتجع، سنرسل لك بريدًا إلكترونيًا لإعلامك بأننا قد تلقينا العنصر المرتجع. سنخطرك أيضًا بموافقة أو رفض طلب الاسترداد الخاص بك.إذا كانت لديك أي مشاكل تتعلق بعملية الاسترداد، يرجى الاتصال بنا. service@roymall.com أو Whatsapp: +447549870296
    Specifications:
    - Can be welding 18650/26650/32650 lipo battery, it is portable, stable and reliable
    - System voltage: 12V-14.6V
    - Working current: 90-150A
    - Suggested battery:1. 20-45ah Lead-acid battery with good performance and small internal resistance
    2. 3.5-5.5ah 45C 3S aeromodel lithium battery pack
    3. 30-35ah capacity 18650 battery pack
    -This circuit with a 12V battery will become an energy storage spot welding machine for welding nickel pieces such as lithium batteries and nickel-chromium batteries. According to different configurations, the thickness can be about 0.1MM-0.15mm

    Function Description:

    After power on, press and hold the switch for 2 seconds to turn on
    There are 4 modes, press and hold the switch for 3 seconds to switch to a u201cbeepinchs sound and finish
    Level 1: Low power1, green light flashes once
    2nd gear: medium power1, green light flashes twice
    Level 3: High power1, green light flashes three times
    4th gear: automatic mode
    When the red light is always on, press and hold the switch to turn off the device.
    NOTE:
    If the battery is pretty good and the internal resistance is very low, and then there may be large current overload.
    If you are not sure about your battery, it"s better to extend the wire by around 1 meter with 2.5u00b2 or 4u00b2 wire, then it will reduce the risk of power tube burnt.
    Package Included:
    1 x Main Circuit Board
    2 x Input Wire
    2 x Output Wire(with Welding Pen)
    1 x Welding Components Kit
    اشتري مع Paypal
    Products related to this item
    Loading related products...
    ❮
    ❯
    Videos for similar product
    Loading product videos...
    ❮
    ❯
    Electronics Ranking
    More Electronics

    آلة لحام نقطي لتخزين البطاريات المحمولة DIY، معدات لحام لوحات الدوائر المطبوعة، لحام نقطي لبطاريات 18650 و26650 بجهد 12 فولت

    آلة لحام نقطي لتخزين البطاريات المحمولة DIY، معدات لحام لوحات الدوائر المطبوعة، لحام نقطي لبطاريات 18650 و26650 بجهد 12 فولت

    آلة لحام نقطي لتخزين البطاريات المحمولة DIY، معدات لحام لوحات الدوائر المطبوعة، لحام نقطي لبطاريات 18650 و26650 بجهد 12 فولت

    Customer Reviews

    4.80 out of 5
    See all 1234 reviews
    Write a Review
    • All Reviews (1234)
    • Image ( 2 )
    • Video (0)
    • All Star
      • All Star(1234)
      • 5 Star (2)
      • 4 Star (0)
      • 3 Star (0)
      • 2 Star (0)
      • 1 Star (0)
    Sort by:
    Top Review
    • Top Review
    • Most Helpful
    • Most Recent
    Reviews only from your country (United States)
    |
    Show Original

    A part of the review has been auto-translated.

    • klemic VIP5
      DE
      04/07/2020

      After I assembled the board with beeper, capacitor and the cables it was not working. There was no power at the welding tips. When checking the boards circuit I found this: MCU output -> drives a PNP transistor -> drives the gates of the N-ch FETs. I post a photo of the schematic: It cannot work. The diode is assembled in wrong direction (the PNP transistor will never switch on) and even if it is reversed it cannot work. The PNP transisitor is always on then because the voltage after the diode can never be higher than MCU power supply (5V) plus diode forward voltage. I removed the diode, PNP transistor and the rest and replaced it by a PC817 optocoupler, after that the spot welder works as intended. (The original circuit may work for battery voltages up to maybe 7-8V but not higher).
      Did the manufactiurer made this change recently? Other users will experience the same issue like me...

      Comments (13)
      Show Original
    • eyahoo VIP3
      CA
      05/11/2020

      Minor assembly required with soldering iron. The Capacitor and Buzzer need to be soldered on, and leads have to be soldered as well. I put XT-60 on mine so I can power it with a large 5000mah 3S lipo, or use my Lipo charger in "power supply" mode.
      Very easy to do and board is marked for where the 2 items have to go. Assembled min in
      Excellent for spot-welding RC battery packs.
      Works on Nicad and NiMh batteries.
      Also works well for LiPo's. Make sure you lift the Lipo leads up, touch them together and then spot weld. Fold them back down when done

      Comments (3)
      Show Original
    Show:
      12...30

      Total 0 pages

      Go to page

      Go
      Customer Q&As
      Searching for relevant results...
      Can't find your answer? Ask a new questionorCustomer Service

      Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

      showing 1-30 of 74 |
      Show Original

      A part of the QA has been auto-translated.

      • 0
        Q: well this work with a 164amp 12v dc server power supply?
        A:
        The electronic power supply might fail if repeatedly short-circuited by the welding. Alternatively, there might not be enough short-term current because most power supplies will instantly shut down when they detect a short-circuit. Remember, the server power supply is designed to operate 164A while the terminals are at 12V, and is definitely not designed to provide 164A into a short-circuit - if the voltage drops towards zero (a short circuit) then the power supply will consider that is a fault condition and switch off. You really should just use the recommended battery, as that's cheaper and easier and proven to work.
        Answered by Coops on 23/03/2020Helpful (0)
      • 0
        Q: can i use car battery?
        A:
        I think that is OK. - Suggested battery: 1. 20-45ah Lead-acid battery with good performance and small internal resistance 2. 3.5-5.5ah 45C 3S aeromodel lithium battery pack 3. 30-35ah capacity 18650 battery pack
        Answered by Liltwas on 16/04/2020Helpful (0)
      • 0
        Q: Will it weld nicd sub c batteries
        A:
        I think that is OK.
        Answered by Anacardic on 04/06/2020Helpful (0)
      • 0
        Q: can you please upload a video on how this product should be used and the precedure of welding batteries using this product? thanks
        A:
        Switch function: press the switch for 1.5 seconds to turn on (green light flashes, low-power spot welding pulses are output every 3 seconds), press the switch for 1.5 seconds (blue light flashes, medium-power spot welding pulses are output every 3 seconds), press switch 1.5 Second (red light flashes, high power spot welding pulse is output every 3 seconds) Press the switch for 1.5 seconds to shut down.
        Answered by Spifit on 16/04/2020Helpful (0)
      • 0
        Q: can I use a 60Ah 400A Lead-Acid car battery with this?
        A:
        Good
        Answered by KazimAnil on 12/07/2024Helpful (0)
      • 0
        Q: Whats machine can work with 4s battery 14.8 volt 7.500 mAh 35C??
        A:
        diy spot welder
        Answered by Fayaz on 23/01/2022Helpful (0)
      • 0
        Q: can I use 4s lipos or just 3s
        A:
        working coltage is 12V,3S and 4S is OK.
        Answered by Bansil on 25/04/2020Helpful (0)
      • 0
        Q: I have a constant 12V output in any mode, a beep but no welding. Any idea how to solve it?
        A:
        Youshould use batteries with high amperage. It's in the description section.
        Answered by ahmetgurkancoskun on 16/08/2022Helpful (0)
      • 0
        Q: can I use psu smps with 12v 29amps?
        A:
        Very nice recommend
        Answered by nameguler on 01/05/2022Helpful (0)
      • 0
        Q: Is there a video or Utube of how it works?
        A:
        There is now a video in the product description that explains everything.
        Answered by 1nformatica on 19/05/2020Helpful (0)
      • 0
        Q: Can i use car battery? 12volt 70ah?
        A:
        12 was 90 a
        Answered by maykil20 on 23/10/2021Helpful (0)
      • 0
        Q: Does it include 2 welding pens?
        A:
        Yeah,as the picture, include 2 welding pens.
        Answered by Dayny on 17/03/2020Helpful (0)
      • 0
        Q: Is it COD?
        A:
        ok 10
        Answered by BG195457125 on 06/03/2022Helpful (0)
      • 0
        Q: Can I wield pouch lipo batteries?
        A:
        20A battery. may be 8s lipo
        Answered by TAURUSFPV on 28/09/2021Helpful (0)
      • 0
        Q: Can I use a 100 Ah 900A battery? Or is it an overkill?
        A:
        itested it by battery 45ah ; it work perfect ; see my video : youtu.be BWGcmCx7lx8
        Answered by BG523410112 on 20/02/2022Helpful (0)
      • 0
        Q: Can i use this circuit with 30A 12V Led Power Supply?
        A:
        30A is probably much too low. I haven't received the unit yet to measure the actual current but will do that when it arrives. I'm guessing that spot welding the metal strips this is intended for requires at least 100A, maybe more like 200A. One way you might be able to use the 30A supply is if you put a very large capacitance in parallel with the supply. The capacitor needs to have a very low ESR (equivalent series resistance). A 50,000uF, 15V, low ESR electrolytic capacitor might work but it may cost you ***** or more. To calculate the actual capacitance required, you need to know the required current and the period of the current pulse and assume a voltage change of about 1 volt, i.e. assume the capacitor voltage will drop from 12V to 11V during the pulse. C = (current x pulse period) divided by the voltage change. So if the current needed is 100A and the the pulse period is 5 milliseconds and the capacitor voltage change is 1 volt, then C = (100A x .005 seconds) divided by 1 volt = 0.5 farads or 500,000uF. That's going to require a bank of 10 paralleled 15V, 50,000uF capacitors. You might as well get a 12V car battery. I think it might be cheaper. But I could be wrong about the max current required.
        Answered by Danno on 18/12/2020Helpful (0)
      • 0
        Q: Is it ok to use this product with a 12v 20ah gel car battery?
        A:
        It is ok, but please check whether the circuit is working. The unit, which I received is faulty. It never could work since there is a severe fault of the circuit design. I had to correct this with major effort.
        Answered by Volker on 14/12/2020Helpful (0)
      • 0
        Q: I just received it, I connected it all normally and as soon as I connected it to the battery, it took out the Diy, it took out smoke and it didn't work anymore, I think they are defective, that's why they sold them cheaper than others, I bought them and they gave me the kind of problem
        A:
        getwell soon
        Answered by ahmetgurkancoskun on 20/07/2022Helpful (0)
      • 0
        Q: can I use a 12v car battery?
        A:
        yes you can
        Answered by Pavel Ponomarenko on 23/03/2022Helpful (0)
      • 0
        Q: Will this work well with 0.15mm nickel plated steel strips? Or is it not powerful enough?
        A:
        This barely works with 0.10 Nickel. This product is much better for 0.15 strips.... Item # 1686661 I use it with a 4S Li-Po battery.
        Answered by JayBee on 26/07/2020Helpful (0)
      • 0
        Q: can I use my car battery? or a simple 2S or 3S 2200mAh 20C lipo battery work?
        A:
        I used my old car battery and it works perfectly
        Answered by maxime287 on 31/01/2022Helpful (0)
      • 0
        Q: Will this work with 3S 4500mAh 45C lipo battery?
        A:
        Yeah,that is OK.
        Answered by Oth_zenGeta on 16/04/2020Helpful (0)
      • 0
        Q: I have a constant 12V output in any mode, a beep but no welding... Any idea how to solve it?
        A:
        '-*1) ( 319) ' '5
        Answered by Lammih on 22/11/2021Helpful (0)
      • 0
        Q: Is it work on battery 4s 14.8volt 7500mAh 35C???
        A:
        No, definitely not! A fully charged 4S has a no-load voltage of 16.8V. Max for this is 14.6V. A 3S is what you want. As a matter of fact, mine blew the input diode when I plugged it into a 3S battery. I had to replace the diode to get it working. This board is not very robust but it does work for 0.1mm straps.
        Answered by jjmusto on 06/02/2021Helpful (0)
      • 0
        Q: instruction for this unit?
        A:
        Youcan check the description section.
        Answered by ahmetgurkancoskun on 28/12/2021Helpful (0)
      • 0
        Q: Can I use a Li-ion battery 4s 9p?
        A:
        Idon't know, I haven't tried
        Answered by ahmetgurkancoskun on 09/12/2021Helpful (0)
      • 0
        Q: can I use 12v from 100amh lead acid battery?
        A:
        yes
        Answered by BG183716441 on 23/11/2022Helpful (0)
      • 0
        Q: Are there any instructions?
        A:
        yes there is.
        Answered by Pavel Ponomarenko on 23/03/2022Helpful (0)
      • 0
        Q: In another site I have seen using it and sell it with a capacitor 35V 2200μF solder it on PCB Board. Why in this one don't use this capacitor? Thank you!
        A:
        It makes no difference. the welder is unable to weld the thinest nickel strip. Avoid this rediculous product.
        Answered by Jim on 24/02/2021Helpful (0)
      • 0
        Q: can it use a 12v 7.2ah battery?
        A:
        Works well
        Answered by Ahmad Mohammed on 07/09/2022Helpful (0)

      سلتي السلة (4827)
      مفضلتي مفضلتي (0)

      Roymall Service

      Hi ?
      How can we help?

      Track Order status FAQ Complaint/Suggestion Contact support (10AM - 7PM ET)
      +44 7549870296
      Home