Доставлено в срок, описанию соответствует полностью. Комплектация совпадает с заявленной, выход блока питания DC 15V 6A, в комплекте печатное руководство на английском языке с понятной блок-схемой меню. Построена на базе MCU ATMEL Atmega32 (проверил лично, фотографии внутреннего мира зарядного прилагаю), разводка разъема ICSP похожа на оригинал от SkyRC (GND на контакте 5). Функции обмена информацией с ПК по умолчанию включены (в меню выбора USB/Temp выбран USB). По факту порт USB отсутствует, вместо этого на разъем датчика температуры выведен пин TX UART, на который при работе зарядное шлет какие-то данные на скорости 9600 бод (смотрел логически анализатором). С составом данных пока не разобрался и к LogView не подключал. Работает прекрасно, альтернативную прошивку (cheali-charger) пока не загружал: не уверен, что мне это нужно. Приобретением очень доволен.

Delivered on time, full description. The installation coincides with the declared output of the DC 15V 6A power supply, in the kit printed manual in English with a clear flowchart menu. Built on the MCU ATMEL Atmega32 (checked personally, photos of the internal charging world enclosed), the ICSP connector wiring is similar to the original from SkyRC (GND on pin 5). Information exchange with PCs is enabled by default (USB/Temp is selected in the USB/Temp selection menu). In fact, the USB port is missing, instead on the connector of the temperature sensor is output pin TX UART, on which when working the charger sends some data at 9600 baud (looked logical analyzer). The data composition has not yet been sorted out and has not connected to LogView. Works perfectly, the alternative firmware (cheali-charger) has not yet downloaded: I am not sure that I need it. Very pleased with the acquisition.

Delivered on time, full description. The installation coincides with the declared output of the DC 15V 6A power supply, in the kit printed manual in English with a clear flowchart menu. Built on the MCU ATMEL Atmega32 (checked personally, photos of the internal charging world enclosed), the ICSP connector wiring is similar to the original from SkyRC (GND on pin 5). Information exchange with PCs is enabled by default (USB/Temp is selected in the USB/Temp selection menu). In fact, the USB port is missing, instead on the connector of the temperature sensor is output pin TX UART, on which when working the charger sends some data at 9600 baud (looked logical analyzer). The data composition has not yet been sorted out and has not connected to LogView. Works perfectly, the alternative firmware (cheali-charger) has not yet downloaded: I am not sure that I need it. Very pleased with the acquisition.

• 
• 
• 
• 
• 
• 
• 
• 
• 

• 
• 
• 
• 
• 
• 
• 
• 
• 

Rotate left Rotate right

Ürünü Sipariş Ettim Tam 10 günde elime ulaştı emeği geçen herkeze teşekkürler ürün performansıda süper kargo mükemmel herbişeyi eksiksiz tam olarak yollamışlar.Birde balans kablosu yaptım piller arası tam hepsi eşit dolsun diye süper şarz ediyor iki adet aldım ve hem tek hücreli olsun hem balans şarzı olsun mükemmel.resimlerinide sizlerle paylaşmak istedim.Bu Arada iki adet siparişim 324,46 TL + Gümrük masrafı 45 tl = 370 Tl'ye elime ulaşmış oldu.bilgilerinize

I ordered the product and it arrived in 10 days. Thanks to everyone who worked it out, they delivered everything in perfect product performance. I also made a balancing cable. It's all in the batteries. Cell and balance, perfect. I wanted to share your pictures with you. I have received the customs charge of 45 TL = 370 Tl

I ordered the product and it arrived in 10 days. Thanks to everyone who worked it out, they delivered everything in perfect product performance. I also made a balancing cable. It's all in the batteries. Cell and balance, perfect. I wanted to share your pictures with you. I have received the customs charge of 45 TL = 370 Tl

• 
• 
• 
• 
• 
• 
• 
• 
• 

• 
• 
• 
• 
• 
• 
• 
• 
• 

Rotate left Rotate right